Industrielle Segmentformer-Maschine mit offenem Gehäuse, Bedienpanel mit Bildschirm und stabilem Metallrahmen auf Rollen

Segment Former SF25-Open

The SF25-Open automatic press – SegmentFormer – is particularly suitable for:

  • Cables with angled connectors
  • Sensors with larger mounting flange
  • Sleeves with longer hose on both sides
  • Angled pipes
Inquire now

Open design for maximum flexibility – ideal for frequently changing molded parts.

With the motorized press, you can achieve a form-fitting connection, among other things, for better strain relief, anti-rotation protection or shielding

For processors of rotationally symmetrical components, the Segmentformer SF25open represents a consistent further development of existing systems for pressing pipes, pipe ends, sleeves, housings, fittings and many other applications.

A typical application, for example, is to mechanically secure connecting cables in sensor sleeves against being pulled out and to seal them at the same time. In addition, this process can be used to flange connectors into sensor housings and much more. Wall thicknesses from 0.2 mm up to approx. 1.0 mm with a diameter of 3 to 25 mm are possible, depending on the material.

PDF

Details

Machine structure

The machine is very easy to operate. The workpiece to be formed is inserted into the machining opening. With this special form of the segment former, it is also possible to insert the workpiece laterally through an insertion slot. As a rule, the workpiece is positioned by means of a stop; it stands still while the forming jaws move axially. The corresponding parameters for machining can be stored and managed in the machine control. The user interface allows simple, logical operation. All functionally important processes are electronically monitored and the data is recorded in the control system. This ensures a high level of process reliability and reproducibility.

  • Basic module with mounting holes for accommodating all functional components, consisting of: Basic console with holder for servo motor, gearbox and encoder
  • Molding head with side slot for easy insertion of the component
  • Forming jaws (forming tool), flat or round pressing, number 6 or 8 possible
  • Covering of the drive mechanism
  • Forming head secured on both sides by cover or protective tube
  • Simple part insertion for quick assembly is guaranteed
  • Also available with light grid, only insertion area or complete
  • Emergency stop stops all movements immediately
  • VIPA Speed7 PLC with operator panel Siemens TP700 comfort; S7 and TIA-Portal V13
  • Data records can be selected via the operator panel (optionally via barcode scanner)
  • Database for product-specific parameters
  • Three access levels for machine control (operator, service and administrator)
  • Language freely selectable, standard in German and English, other languages at an additional cost
  • Control cabinet mounted in the frame
  • Acceptance of all machine components
  • Steel frame welded and coated with 4 rotating rollers, 2 with locking brake
  • Optional made of aluminum system profile
  • Documentation, hazard analysis, CE mark

Optional components / attachments

The standard SegmentFormer SF25open can be equipped with various optional attachments and functions. This makes it possible, for example, to expand the machine into a semi-automatic press with process monitoring.

  • Position stop is moved manually to the position
  • one position possible for each data record
  • Position queried via encoder and displayed on OP
  • Component position is sensorially detected at the position stop
  • Machine is started automatically or with a foot switch
Manueller Anschlag mit Führungsschiene, Spannhebel und Mechanik zur Positionierung von Werkstücken auf einer Maschinenbasis
  • Freely programmable sentence sequence (max. 30 commands per data record)
  • several pressing positions programmable in one data record
  • Stop is moved motorically to the stop position by selecting the data record
  • Position is displayed on OP
  • Component position is sensorially detected at the position stop
  • Machine is started automatically or with a foot switch
Motorischer Anschlag mit Führungsschiene, Kabelkette, Sensor und elektrischen Anschlüssen in einer Maschinenumhausung
  • Force transducer integrated in the toggle lever determines forces occurring in the lever
  • Graphical output of the forces on a separate measuring device
  • OK and not OK evaluation
Maschine mit integrierter Kraft-Weg-Überwachung und digitaler Anzeige zur Qualitätskontrolle
  • Table top mounted on height-adjustable columns
  • Height adjustability up to 300mm
  • 4 rotating castors, 2 with locking brake
Industriemaschine von Fichter formtec auf höhenverstellbarem Gestell mit integriertem Bedienpanel
  • Securing free access to the assembly of the SegmentFormer.
  • With obstacle detection
  • Initial acceptance carried out
Industriemaschine von Fichter formtec mit gelbem Lichtvorhang als Sicherheitsvorrichtung
  • Adaptation of the machine according to customer requirements.
  • Integration of the machine as a sub-station in complete systems possible
  • Further alternatives are conceivable
Sonderbauform Maschine von Fichter formtec mit geöffnetem Gehäuse und sichtbaren mechanischen und elektrischen Komponenten

Technical data

  • Dimensions Standard 1,000 x 1,000 x 1,400 mm (LxWxH)
  • Tool data Number of forming jaws 6 / 8
  • Forming jaws Hardened
  • Possible pressing diameters 3 – 25 mm
  • Max. bead length Up to 30 mm
  • Voltage supply Mains 3 x L / PE 400V / 50Hz
  • Power3 kVA
  • Electricity8.2 A
  • Pre-fuseMax. 16 A
  • Line cross-section5 x 2.5mm²
  • Compressed airNot required
  • Weight Approx. 350 kg
  • Repeatability ± 0.05 mm
  • Cycle timeApprox. 3 – 8 seconds
Inquire now
Mitarbeiter im Büro führt ein Telefonat und lächelt dabei, Arbeitsplatz mit Laptop und Drucker im Hintergrund

Contact

Contact us.

Do you have any questions about our services or would you like to discuss a specific project? We look forward to hearing from you and are happy to be there for you personally.

Bruckmatten 6, 79356 Eichstetten am Kaiserstuhlinfo@fichter-formtec.de07663 914397-0To the contact form
Logo

Zukunft Elektromobilität – neue Technologien

Auf Grund der großen Umweltthematik der letzten Jahre und nicht zu Letzt auch durch diverse „Abgasskandale“, ist der Bedarf einer Alternative zum Verbrennungsmotor kontinuierlich gestiegen. Daher ist es nicht verwunderlich, dass immer mehr Autos und Fahrräder heute schon elektrisch betrieben werden. Doch nicht nur im „kleinen“ werden solche Technologien eingesetzt, in Zukunft sollen auch LKWs mit Elektroantrieben ausgestattet sein.

In solchen Systemen fließen hohe elektrische Ströme, die es gilt unter einem großen Maß an Sicherheit, richtig im Fahrzeug zu verteilen. Unteranderem werden dabei enorme Anforderungen an die Verbindungen, Abschirmungen und andere Applikationen zwischen Kabel und deren Anbaukomponenten gesetzt.

Es überrascht daher nicht, dass die Nachfrage nach neuen Technologien und Lösungen im Bereich Leitungen, Kabeln, Batterien, Steckern, Verbindungen usw. sehr gestiegen ist. Eine unserer Technologien, die sich in den letzten Jahren bei Kabelkonfektionären, Herstellern und Zulieferern immer mehr bewährt hat, ist das befestigen von Komponenten durch Verpressen oder Rollieren.

Wir bieten in diesem Bereich unterschiedlichste Lösungen und Ansätze wie Sie mit unseren Maschinen kraftschlüssige und unlösbare Verbindungen erzeugen können. In Zusammenarbeit mit unseren Kunden entwickeln wir die optimale Form für Ihre individuellen Produkte. Speziell, wenn es darum geht gewisse Auszugskräfte, Drehmomente, Dichtigkeiten oder Genauigkeiten zu erzeugen. Auf „unsaubere“ Verfahren wie Kleben, Schweißen und Vergießen kann danach in der Regel verzichtet werden. Außerdem liefern wir Ihnen Optionen wie Kamera- und Kraft-Weg-Überwachung für eine hohe Prozesssicherheit gleich mit dazu.

Sie haben eine Anwendung oder sind generell Interessiert, dann nehmen Sie Kontakt mit uns auf!